Galaxy G6
- 85 -
radio communication equipment, the shade of trees, and the sides of waters, all of which will
produce different degrees of impact on the GPS signal reception and emission of radio signals
1)
Set a tripod to the location with known coordinates (or unknown), attach base receiver to
the tribrach adapter set (the measuring plate is recommended to install under base receiver).
2)
Install the transmitting antenna onto the receiver.
3)
Make sure all connections are alright, then power on receiver.
4)
The receiver is set as base with internal radio mode. (set on the control panel, or on internal
Web UI or on the software installed on data collector).
§7.2.1.2 Start the Base station
First time to start the base station, all the relative parameters are completely configured before
starting.
Using EGStar3.0
1)
Run EGStar3.0 program on data collector;
2)
Go to Config
Device Config
Instrument Config page to c
onfigure the working mode
and datalink for base receiver.
3)
Tap on Work mode setting and then check the box of Set work mode , then click on
Next to continue;
4)
Check the box of Base option and click OK and return to Instrument setting page.
At
this moment, Galaxy G6 prompts the correct working mode with voice guide.
