Galaxy G6
- 66 -
takes EGStar for example:
EGStar is the specific software for G1 measuring system, mainly for the collection and
calculation of the measuring points.
Before installing of EGStar, you need to install Microsoft Active Sync. After installing it on your
computer, connect handheld to computer with a cable, and install EGStar into the handheld, at
the same time, keep the mainframe power on, then set as follows:
Open
EGStar software and enter the main interface. Click OK on the "prompt" window.
1. "Configure" "Port Config", in the "Port Configuration dialog box, select the port COM8
", with the same serial number which you use to connect the Bluetooth serial port service. Click
"OK." If the connection is successful, the status bar will display related data. If there is barrier,
exit EGStar to reconnect (If the above settings are correct, then link directly). Handheld
connecting with the host PC can do the follow-up measurement.
