Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 9 of 30
All personnel involved with installation, operations, and maintenance of the Quick-Check-PowerSaver Manifold must
follow safe working practices, OSHA, and local health/safety code regulations during the installation, operation, and
maintenance of the unit.
Warning:
• This manual must be read in its entirety prior to installing and operating the Quick-Check-PowerSaver Manifold to
prevent accidents and damage to the equipment.
• Contact your supplier if you detect a problem that you cannot solve with this manual.
• Only use the PowerSaver Manifold in accordance with its designed purpose.
• Only service-engineers, that are qualified to work on electric and pneumatic equipment, can do the installation,
maintenance, and repairs. Unqualified people are not allowed to repair the equipment.
• Do not tamper or experiment with the equipment or exceed the technical specifications
3
PRODUCT INSTALLATION
3.1
UNPACKING AND PREPARATION
The Quick-Check-PowerSaver Manifold 6 Port will arrive in a cardboard box. Identify and verify that all parts listed on
the packing list are present and undamaged. Ensure that all parts to connect to the AutoPurge System (APS) are with
the unit. South-Tek Systems (STS) is not responsible for damages that have occurred during the shipping and
handling of the N
2
-BLAST. Any visual damages should be immediately documented and reported to the shipping
company responsible. Contact STS at (888) 526-6284 to assess the damages only after the shipping company has
been notified.
