Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 18 of 30
5.7
ZONE HISTORY
To access the “Zone History” screen, open the “Zone Info” screen in the “Menu” and press the “Zone History” button
at the bottom of the screen. Zone History can be reset by entering the code “7777” into the box next to “Reset Days”
button and then press the button.
5.8
COMMUNICATION SETTINGS FOR ETHERNET CONNECTION (OPTIONAL)
Ethernet communication is an optional feature that can be purchased with each Quick-Check-PowerSaver Manifold.
Once it is included, the user can communicate with the system by assigning a static IP address to the controller and
entering in that IP address into the controller. Once the static IP is entered, the user must press the connect button or
cycle the power to the controller to see the device on their intranet network. Communication through Ethernet
includes Remote Access, SD Card Access, and MODBUS TCP/IP communication. A connection status message will
indicate if a successful connection has been made.
Remote Access
A copy of the setup files for this software will be included on the microSD card installed in the PLC if the Ethernet
option was purchased. This software can be installed on any windows based PC with Windows 7 or higher. The user
will have full access of the controller touchscreen as if the user was standing in front of the machine and using the
mouse to navigate through the screens. To set up communication connection to the controller, the communication
settings on the computer must be set up as the following:
Figure 11: Zone History
Figure 12: Network Connection Screens
