Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 7 of 30
1.4
LIMITS OF LIABILITY
Buyer's exclusive remedy for all claims shall be for damages, and seller's total liability for any and all losses and
damages arising out of any cause whatsoever including, without limitation, defects in or defective performance of the
system, (whether such claim be based in contract, negligence, strictly liability, other tort or otherwise) shall in no
event exceed the purchase price of the system in respect of which such cause arises or, at seller's option, the repair
or replacement of such; and in no event shall seller be liable for incidental, consequential or punitive damages
resulting from any such cause.
Seller shall not be liable for, and Buyer assumes all liability for, the suitability and the results of using nitrogen by itself
or in any manufacturing or other industrial process or procedure, all personal injury and property damages
connected with the possession, operation, maintenance, other use or resale of the System. Transportation charges
for the return of the System shall not be paid unless authorized in advance by Seller.
NOTE: Any MODIFICATIONS made by the customer without the written consent of South-Tek Systems will void the
product’s design specifications.
1.5
SERVICE RETURN POLICY
If the system cannot be repaired at the site, and it is necessary to return a system for service, the following
procedures must be followed:
The owner must obtain a written Return Material Authorization number, which references the model and
serial number, from South-Tek Systems. No items will be accepted for service or credit unless prior written
authorization has been issued by South-Tek Systems.
All items are to be returned with the original packaging material if possible. Make sure that all items are
packaged for safe return to South-Tek Systems. South-Tek Systems will not be responsible for damages,
which occur in transit. Any damage that occurs to the system because of failure to adhere to this procedure
will be the sole responsibility of the customer. Contact South-Tek Systems for a return shipping address.
Shipping charges must be prepaid on all returns.
2
SAFETY GUIDELINES
The following section outlines the basic safety considerations regarding installation and operation of the Quick-
Check. For additional safety information regarding other equipment used in conjunction with the Quick-Check, such
