Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 25 of 30
Figure 27:
NOTE: A plugged drain system will cause water and oil to carry over into the system, which will cause permanent
damage to the media inside the Quick-Check PowerSaver 6 Port Manifold. Such damage is not covered by the
manufacturer's warranty. Use of filters other than those specified by South-Tek
Systems could result in damages not covered by the warranty.
5.
Wash the bowls in soapy water and rinse thoroughly as needed. Use of light air gun to remove debris is
also acceptable. Make sure to always wipe down with a clean and dry cloth.
6.
Install new filter element and replace O-rings as needed.
7.
Put the filter bowl back on the system in reverse order of how it was removed making sure the bowl is
seated in place correctly. Only tighten metal casing around filter bowl hand tight.
8.2
MAINTENANCE SCREEN
8.2.1
Maintenance Test
Maintenance Test is a feature on the Quick-Check-PowerSaver Manifold 6 Port which allows the user to view a quick
operation of the sampling function in the unit. To utilize the Maintenance Test ensure the ON/OFF selector switch on
the Home screen is in the ON postion then navigate to the Maintenance screen through the main Menu page.
The Maintenance Test can be started by pressing the
button on the right, it will cycle through each of the zones
for twenty seconds each. Once the last zone is sampled,
the unit will return to normal operation.
Note: Do not turn off the Maintenance Test once it has
started, if the test needs to be stopped at any point press
the selector switch on the Home screen to the OFF
position
This test mode will take purity and flow readings on each
zone although normal run purity may differ from this
reading.
8.2.2
Valve Test Mode
Valve Test Mode is a feature on the Quick-Check-PowerSaver Manifold 6 Port which allows the user to actuate each
individual solenoid valve to ensure proper function. To utilize the Valve Test Mode turn the ON/OFF selector switch
on the Home screen to the OFF postion then navigate to the Maintenance screen through the main Menu page.
Figure 22: Maintenance Screen
