South bend SB1493, Руководство пользователя

Страница: 22 / 32

-20-
For Machines Mfd Since 1/21
South Bend Tools
Model SB1493
O P E R A T I O N
Plastics
Soft
Metals
Thin
Plating
Gold
Silver
Chrome
&
Nickel
Plate
Copper
Brass
Aluminum
Iron
Steel
Stainless
Steel
Compound
Type
Tripoli
Dark Rouge
White Rouge
Black Rouge
R F P R F P R F P R F P R F P
X
X
X
X X
X X X
X
X X
X
Buffing Sequence: R = Rough F= Final Cut, Initial Polish P = Final Polish
Selecting
Buffing Compounds
Most colors of abrasives have similar applica-
tions, but always check with the manufacturer of
your particular compound
Grizzly offers the following compounds:
Red Rouge — Made for fine polishing on brass
and gold Provides an excellent shine when used
with the loose muslin buffing wheel
Green (Extra Fine) — Great for extra-fine pol-
ishing on most metals to bring out that mirror
finish Works best with loose muslin and spiral
sewn buffing wheels
White — Great for ivory, plastic and resins
when used successively with the soft spiral sewn
and soft airway buffing wheels
Black — Designed to be used with sisal and air-
way hard buffing wheels, this compound is per-
fect for the initial rough cut on stainless steel
and iron
Tripoli — A true middle-of-the-road abrasive,
Tripoli provides an excellent medium cut for
brass, aluminum and zinc alloy
Green (Fine) — Slightly more abrasive than
the extra-fine green, this green compound is
great for a medium-to-fine polish with most soft-
er metals
Buffing Compound Sequence Key
Loading Compound
Select a buffing compound and buffing wheel that
is suitable for the workpiece and each sequence
of the buffing or polishing operation
To load compound on wheel:
1. Select buffing wheel suitable for workpiece
(refer to Selecting Buffing Wheels on
Page 18) Follow directions on Page 19 to
install wheel
2. Select buffing compound suitable to material
(refer to Selecting Buffing Compounds
and Buffing Compound Sequence Key)
Note: Make sure buffing wheel is free of any
compound used in prior buffing operation.
Clean with a buffing wheel rake if necessary
(see Cleaning on Page 22).
3. Put on safety glasses, face shield, and
respirator, then connect machine to power
4. Stand to side of buffing wheel and turn
machine ON Allow wheel to reach full
speed
5. Apply buffing compound to rotating face of
wheel, as shown in Figure 14 Only hold
compound to wheel for 2–5 seconds The
polisher is now ready for buffing/polishing
W
he
el
Ro
tat
ion
Only Apply
Compound Here
Right Front
Side View
FRONT TOP
BOTTOM
Figure 14. Location where buffing compound should
contact wheel.
6. Turn machine OFF when operation is
complete