South bend SB1118, Руководство пользователя

Страница: 34 / 84

-32-
For Machines Mfd. Since 10/21
South Bend Tools
Model SB1118
O P E R A T I O N
Using TABLE UP/
DOWN Buttons
The TABLE UP/DOWN buttons are located
on the control panel and can be used to
electronically raise and lower the table. When
the digital readout is in MANUAL mode, the
movement of the table will be displayed in the
actual window of the digital readout.
The handwheel should be disengaged when
using the TABLE UP/DOWN buttons or the
digital readout. Otherwise, the rapid rotation
of the handwheel could cause personal injury
or machine damage.
1. Press and hold TABLE UP button (see
Figure 30) to raise table. Release button to
stop movement.
2. Press and hold TABLE DOWN button (see
Figure 30) to lower table. Release button to
stop movement.
Figure Figure 30. Location of table control buttons. . Location of table control buttons.
To use TABLE UP/DOWN buttons:
Using Digital Readout
Figure Figure 31. Digital readout windows and keypad. . Digital readout windows and keypad.
The digital readout can be used to store up to ten
preset table positions, move the table to a preset
position, and add and subtract distances from a
current table position.
The digital readout features two windows (see
Figure 31). The top window shows the target
position value intended for the table (if one has
been entered), and the bottom window shows the
actual position of the table.
The digital readout has two modes of operation:
MANUAL and SINGLE.
In MANUAL mode, the table can be moved with
the TABLE UP/DOWN buttons (refer to Page
33) or the digital readout keypad.
In SINGLE mode, the digital readout provides
access to a variety of controls for making precise
table movements.
Target Target
Window Window
Actual Actual
Window Window
The handwheel should be disengaged when
using the TABLE UP/DOWN buttons or the
digital readout. Otherwise, the rapid rotation
of the handwheel could cause personal injury
or machine damage.