South bend SB1108, Руководство пользователя

Страница: 22 / 76

-20-
For Machines Mfd. Since 12/20
South Bend Tools
Model SB1108/SB1109
P R E P A R A T I O N
7. Thread handle into rim of handwheel and
tighten with wrench (see Figure 17).
10.
Using a straightedge as a guide, rotate
set screws from Step 9 until extension
tables are in plane with main table, then
fully tighten hex bolts from Step 8 (see
Figure 19).
Figure 19. Leveling extension table.
Figure 17. Installing handwheel on shaft.
Handle
LOW
HIGH
8. Attach each cast-iron extension table to
planer table with (3) M8-1.25 x 25 hex
bolts and (3) 8mm flat washers as shown in
Figure 18. Do not fully tighten hex bolts at
this time.
9. Thread (3) M8-1.25 x 12 set screws into
each extension table at locations shown in
Figure 18.
Note:
Bed rollers will give you a false reading
if they are raised above table. Move them
down or work around them when leveling
extension wings (refer to Bed Roller Height
on Page 29 for more information).
6. Line up notch in handwheel bore with
key, slide handwheel onto shaft, then slide
handwheel direction label onto shaft, and
secure with M10-1.75 hex nut and 10mm flat
washer (see Figure 17).
5. Insert 4 x 4 x 10 key into keyway on
handwheel shaft (see Figure 16).
Handwheel Shaft
Key
Figure 16. Key inserted into handwheel shaft.
Figure 18. Extension table mounting locations.
x 3
x 3