9
Π
Selection of 5kV test voltage
Indicates 5kV selected
Θ
Ρ
These keys (decrease or increase) enable
the selection of the value that is being
programmed.
–
Λ
Activates/ enables programming of the limit
for the “Pass / Fail” test
Indicates when the
measured resistance is
lower than programmed
limit
Σ
Start – Start test
Indicates that the test is
being executed
Υ
Stop – End of test
–
4. Display
Measurement results in the corresponding measuring unit, elapsed time
since the measurement started, selected test voltage, analogue indication
by means of a bar-graph and several messages to the operator are
displayed on alphanumeric LCD.
Applied voltage
Measured result
Bar-graph
Data & Time
Elapsed time
Current
Selected voltage
Test Nº.
