Sourcetronic 60961, Руководство пользователя

Страница: 96 / 129

Chapter 5 Function parameter
90
Code Parameter name Setting range
Factory
default Change
12: Inverter overload (E.oL2)
16: Inverter module overheating
fault (E.oH2)
17: External fault (E.SET)
18: Communication fault
(E.CE)
19: Current detection fault
(E.oCC)
20: Auto tuning fault (E.tE)
21: EEPROM operation fault
(E.EEP)
22: STD feedback
disconnection fault (E.STd)
Record the type of the last three faults of inverter, see the troubleshooting for the
details.
y1.03 Running frequency of 0.00Hz ●
y1.04 Output current of 0.0A ●
y1.05 Bus voltage of current 0V ●
y1.06 Input terminal status of 0 ●
y1.07 Output terminal status
f f l
0 ●
The status of current fault input terminal are decimal digits. Display all digital input
terminal status of the last fault, the order is:
Bit0 Bit1 Bit2 Bit3 Bit4
DI1 DI2 DI3 DI4 DI5
Bit5 Bit6 Bit7 Bit8 Bit9
Reserved Reserved Reserved Reserved Reserved
When the input terminal is ON, the corresponding bit is 1, OFF for 0. This value can be
used to understand the state of digital input signal at the sate of failure.
The status of current fault output terminal are decimal digits. Display all digital output
terminal status of the last fault, the order is:
Bit0 Bit1 Bit2 Bit3 Bit4
MO1 Reserved Reserved R0 Reserved
When the output terminal is ON, the corresponding bit is 1, OFF for 0. This value can
be used to understand the state of digital output signal at the sate of failure.