l
I
I
The LEDs still flash but there is no need to move the fader
as the automation system will find the null point for you.
When the automation has located the null point the GREEN
LED will light and the flashing stops. The speed at which
the automation locates the null point can be set up in the
nulling menu.
Fader isolate mode
If you want to use a fader as normal (ie without automa-
tion) then the fader can be put into isolate mode. To do
this turn otT the fader LEDs on the required channel.
When a fader is in isolate mode the automation system has
no etTect on that fader. Likewise, movements of the fader
will not be recorded into the automation system.
Faders can be put into isolate at anytime. Any number of
faders can be in isolate.
Global fader modes
Using the control panel it is possible to drop all faders into
one of the four fader modes:RECORD, PLAY, TRIM or
ISOLATE
Turn the rotary dial until FADERS is displayel;l:on ,the LCD
display. Use the right cursor key to move the-PUfsor to the
right. Select the required fader mode with~he rotary,dial
and press ENTER.
The LEDs. alongside .the fader~ v.:~lllight tP::sl1oWt,hemoeJe:
IVl.lAlllt;
IV.LUU~;:,)'::"7
Both LEDs ojJindicates
isolate
mode
o
T
To put all channels into play select
play with dial and press ENTER
__
00:00:00:00
faders play
To put all channels into trim select
play with dial and press ENTER
!
REDON
~
GREENON~
BOTHON~
BOTHOFF~
.,','
REf,:ORD
PLAY
TRIM
ISOLATE
__
00:00:00:00
faders trim
I
Global ON button modes
Using the control panel it is possible to drop all ON buttons
into one of the four modes:RECORD,
PLAY, lWDATE
or
ISOLATE.
Turn the rotary dial until 'ONs' is displayed on the LCD
display. Use the right cursor key to move the cursor to the
right. Select the required fader' mode with the rotary dial
and press ENTER.
To put all channels into isolate
select play with dial and press
ENTER
__
00:00:00:00
faders isolate
