3 PIN KEYLESS CONNECTOR
BLUE
NEGATIVE OUTPUT FOR UNLOCK
RED
12+ OUTPUT FOR DOOR LOCK MODULE
NEGATIVE OUTPUT FOR LOCK
GREEN
System Reset will set all program menu’s to the default factory setting.
SYSTEM RESET
Cycle the Ignition Key - ON/OFF ON/OFF ON
(Leaving the key ON)
1 chirp confirms program mode entered followed by
3 chirps confirming that the system has reset.
1 -
2 -
3 -
Press and release the program switch (The siren will chirp)
**If the siren does not chirp repeat step 1-2.
Hold the program switch until the siren chirps 3 times.
SYSTEM PROGRAMMING -
Menu 1
INSTALL MANUAL
SYSTEM WIRING
AL.1
