background image

4

ENGLISH

THESIS 1912 ZOOM User manual

IMPORTANT SAFETY SYMBOLS

The symbol is used to indicate that some hazardous live terminals are 

involved within this apparatus, even under the normal operating con-

ditions, which may be sufficient to constitute the risk of electric shock 

or death.
The symbol is used in the service documentation to indicate that spe-

cific component shall be replaced only by the component specified in 

that documentation for safety reasons.

Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off

WARNING: Describes precautions that should be observed to prevent the danger 

of injury or death to the operator.

CAUTION: Describes precautions that should be observed to prevent danger of 

the apparatus.
To protect the environment, please try to recycle the packing material 

as much as possible
The projector is for indoor use only, IP20. Use only in dry locations. 

Keep this device away from rain and moisture, excessive heat, humid-

ity and dust. Do not allow contact with water or any other fluids, or 

metallic objects.
Don’t throw this product away just as general trash, please deal with 

the product follow the abandon electronic product regulation in your 

country.

0.5m

Locate the fixture in a well ventilated spot, away from any flammable 

materials and/or liquids. The fixture must be fixed at least 50cm from 

surrounding walls

TAKING CARE OF YOUR PRODUCT

 

f

Read these instructions

 

f

Keep these instructions

 

f

Heed all warning

Содержание THESIS 1912 ZOOM





















Отзывы: