background image

18

ENGLISH

THESIS 1912 ZOOM User manual

10. WARRANTY AND SERVICE

All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific 

to the date of purchase as shown on your purchase receipt.

The following cases/components are not covered from the above warranty:

• 

Any accessories supplied with the product

• 

Improper use

• 

Fault due to wear and tear

• 

Any modification of the product effected by the user or a third party

SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing 

faults free of charge at SOUNDSATION’s discretion either by repair or by exchanging individual 

parts or the entire appliance. Any defective parts removed from a product during the course of a 

warranty claim shall become the property of SOUNDSATION.

While under warranty period, defective products may be returned to your local SOUNDSATION 

dealer together with original proof of purchase. To avoid any damages in transit, please use the 

original packaging if available. Alternatively you can send the product to SOUNDSATION SERVICE 

CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product to service 

center you need an RMA number. Shipping charges have to be covered by the owner of the prod-

uct. 

For further information please visit 

www.soundsationmusic.com

11.  WARNING

PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only

This symbol indicates that this product is not to be disposed of with your household waste, ac-

cording to the WEEE Directive (2202/96/EC) and your national law. 

This product should be handed over to a designated collection point, e.g., on an authorized one-

for-one basis when you buy a new similar product or to an authorized collection site for recycling 

waste electrical and electronic equipment (WEEE). 

Improper handling of this type of waste could have a possible negative impact on the environment 

and human health due to potentially hazardous substances that are generally associated with EEE. 

At the same time, your cooperation in the correct disposal of this product will contribute to the 

effective usage of natural resources.

For more information about where you can drop off your waste equipment for recycling, please 

contact your local city office, waste authority, approved WEEE scheme or your household waste 

disposal service.

Содержание THESIS 1912 ZOOM





















Отзывы: