soundsation MHL-200, Руководство пользователя

Страница: 19 / 24

19
ENGLISH
MHL-200 User’s manual
Prism 8-facet prism rotating in both directions at different speed
Focus DMX controlled. Mechanical multi-step focus with three different angles
(15 degree, 18 degree and 22 degree)
Shutter Mechanical (non step can be adjusted) shutter are suitable for different
line angles
Effect Seven big prism gobos
Pre-programmed and changing shutter pulse effect
Motor 9 high quality stepping-motor controlled by microprocessors
Electronics DMX512 digital serial input
Pan range: 530 degree
Tilt range: 270 degree
Rigging Stands directly on the floor
Use two clamps to install
Two truss orientation
Safety chain/cord attachment point
Temperature Maximum ambient temperature: 40 degree
Maximum housing temperature: 80 degree
Dimensions and
Weight
Length of base (including handles): 520mm
Width: 520mm
Height (head horizontal): 700mm
Net weight 28kg
Shipping weight 30kg
7. MAINTENANCE AND CLEANING
The operator must make sure that correlative safety equipment and an expert
inspects machine’s technical installations after every four years in the course
of an acceptance test.
The operator must make sure that correlative safety equipment and machine’s
technical installations are inspected by a skilled technician once a year.
The following points need to be considered during the inspection:
1. All screws used for installing the devices have to be tightly connected and
must not be corroded.
2. There cannot be any deformations on housing, fixations and installation
spots (ceiling, suspension, trussing).