UR220 / English Manual
SLEEP OPERATION
The sleep timer allows you to turn the unit off after a designated time has
elapsed.
1. While listening to the radio, tap the unit button SLEEP button (8) or the remote
control button (3) the sleep time ‘90’ (minutes) appears in the LED DISPLAY.
2. Repeatedly tap the SLEEP button to select a sleep timer of 90, 60, 30 or 15
minutes. Wait for about 10 seconds after your selection for the unit to confirm the
selection, the unit will play for the selected length of time then turn itself ‘Off’
automatically.
3. To cancel the sleep timer, repeatedly tap the SLEEP button until you see the
current time in the LED DISPLAY after last sleep timer option (15 minutes).
•
This function can be cancelled with the button (14).
4. This function can be cancelled with the unit button (14) or the remote control
button (1).
Note:
There is no sleep indicator in this unit. To check the remaining sleep time, tap the
SLEEP button once.
Nap alarm
The nap alarm can be used for e.g. a short “nap”. The function only operates in
standby.
•
Press the unit button (11) or the remote control button (11) to select the time
after which the device will beep. Select from 90 to 10 minutes or OFF (off) in
steps of 10 minutes.
•
After the selected time has elapsed, an increasingly fast beep will sound. Use
the unit button (14) or the remote control button (1) to turn off the beep.
Note: When using the NAP alarm the wake up light function is inactive.
NATURAL SOUND
1. In standby mode, tap the unit ON-OFF button (14) or the remote control
ON-
OFF button (1) to turn the unit ‘On’.
2. Press the unit button (9) or the remote control button (2) to switch to natural
sound mode.
3. Use the main unit buttons (10) and (11) or the remote control button (15) to
select the desired natural sound.
DAYLIGHT SAVING TIME (DST) MODE
If daylight saving time (DST) is available in the summer time in your State, you
may use this option to adjust to the correct time easily.
1. In standby mode, press and hold the unit DST button (11) or the remote
control button (11) for 2 seconds to advance the displayed time by one hour.
2. To cancel DST mode, repeat the above operation.
