UR220 / English Manual
AUX IN JACK
(Cable not included)
1. If required, use a suitable adapter (not included).
Connect the external device as follows :
•
With a 3.5 mm stereo jack plug to the AUX IN socket (15).
2. Turn the device on using the unit button (14) or the remote control button (1).
Press the unit button (9) or the remote control button (2) to switch to AUX IN
mode. AUX IN appears in the display.
3. Start the playback of your audio source. Listen to the sound playback via the
speaker. You can adjust the volume using the unit buttons (12/13) or the remote
control button (9/14).
4. For the further procedure, please refer to the user manual of the external audio
source.
NOTE:
If possible, adjust the volume of the external unit to a comfortable level.
Stop AUX IN operation
Disconnect the cable from the AUX IN jack. Press the unit on/off button (14) or
the remote control button (1) to turn the unit off.
