RCD1770 / English Instruction Manual
3
INTIAL SCAN
When this unit is switched on for the first time at DAB mode, if not please press
“SOURCE”
button switching to DAB then press
“SCAN”, the scanning display will be shown while the
scanning process takes place:
Progress bar Number of stations found
The radio scans all usable stations (full scan) and stores them alphanumerically -1 Radio, 2
Radio, AA Radio, AB Radio…
The initial scan will take a few minutes. After the scan, the clock will be set and the radio will
play the name of the first station in the sequence. To browse for another station, refer to the
next section.
BROWSING FOR A STATION
To browse for another DAB station:
Press the “TUNE ▲/▼” to select the station.
After short delay, the radio will tune to the station
ADJUSTING THE VOLUME
Press the
“VOLUME ▲/▼” button to increase or decrease the volume level.
SET CLOCK
This main option enables the clock to be set manually if these is no available DAB transmission.
To set the time and data manually:
When unit during standby mode, press MENU button then press the
“TUNE ▲/▼” to select [Set
Clock]. Press
“SELECT” button to confirm.
Set the clock mode
“12/ 24 Hour”, press the “TUNE ▲/▼” to choose 12 or 24 time format then
press
“SELECT” to next setting.
Set Hour, press the
“TUNE ▲/▼” to set the hour then press “SELECT” to confirm.
Set Min, press the
“TUNE ▲/▼” to set the minute then press “SELECT” to confirm.
SELECTING A SOURCE
You can choose to listen to following sources by pressing
“SOURCE” button.
DAB: DAB+ radio
FM: FM radio
CD: CD/ MP3 playback
USB: USB-MP3 playback
