18
USER GUIDE
USER GUIDE
USER GUIDE
USER GUIDE
USER GUIDE
8
MUTE
All outputs from the channel except inserts are on when the MUTE switch is released and
muted when the switch is down, allowing levels to be pre-set before the signal is required.
9
INPUT CHANNEL FADER
The 100mm FADER, with a custom-designed law to give even smoother control of the
overall signal level in the channel strip, allows precise balancing of the various source
signals being mixed to the Master Section. You get most control when the input GAIN is
set up correctly, giving full travel on the fader. See the “Initial Setup” section on page 23
for help in setting a suitable signal level.
0
SOLO
When the latching SOLO switch is pressed, the pre-fade pre-mute signal is fed to the
headphones, control room output and meters, where it replaces the MIX. The SOLO LED
on the Master section illuminates to warn that a SOLO is active. This is a useful way of
listening to any required input signal without interrupting the main mix, for making adjust-
ments or tracing problems. When SOLO is pressed anywhere on the console, the Control
Room outputs automatically switch from monitoring the Mix Outputs.
q
PEAK LED
This LED will light when the signal level approaches clipping at any of the three monitored
points:
a) PRE-EQ
b) POST-EQ
c) POST-FADE
q
7
1
2
3
4
5
6
8
0
9
