SoundCraft Si Performer Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 80

SoundCraft Si Performer Скачать руководство пользователя страница 60

60

Soundcraft Si Performer User Guide 0912

HiQNet™

As part of the cue replay function Si PERFORMER can send HiQnet messages when a cue is replayed
to trigger events in a HiQnet system. Set-up for the HiQnet function is from within the CUE LIST,
scroll to the cue in which you wish the HiQnet event to happen and press the EDIT CUE button:

•

Venue Recall

– Set On or Off to enable or disable sending of HiQnet Venue Recall preset

messages when the cue is replayed.

•

Venue Numbe

r – Sets the HiQnet Venue Number that is sent; range is 1- 65535.

NOTE: If HiQnet Venue Recall is set On, the HiQnet icon in the Cue List view will be lit orange.

To learn more about the Harman HiQnet system visit http://hiqnet.harmanpro.com/

OPTION CARD SLOTS

The Si PERFORMER features two expansion slots, each compatible with all Si series option cards.
Slot 1 offers 64 in and 64 out and supports a Soundcraft /Studer connected stagebox. All 64
inputs (digital in 1-64) and outputs (digital out 1-64) are freely assignable / patchable.
Slot 2 offers 64 in and 56 out and supports a Soundcraft /Studer connected stagebox. All 64
inputs (digital in 65-128) are freely assignable, as are the first 32 outputs (digital out 65-96).
Patches to the remaining outputs is fixed as:

•

Repeat of the 16 analogue patches (digital out 97-112).

•

Repeat of the AES out (digital out 113-114).

•

Repeat of the headphone out (digital out 115-116).

•

Repeat of main L&R (digital out 117-118).

•

Digital outputs 119-128 are connected to ‘silence’.

For a detailed description of the cards refer to the Si Option Card User Manual available from
www.soundcraft.com

«
...
58
59
60
61
62
...
»

Содержание Si Performer

















































































Отзывы:

Нет отзывов