38
Soundcraft Si Performer User Guide 0912
COPY & PASTE
This facility allows almost any processing section to be copied easily and quickly from a
channel or bus and pasted to another channel or bus.
NOTE: The clipboard captures the state of an item at the point COPY & PASTE mode
is activated or SELect is changed; changes to the SELected source channel will not
be updated to the clipboard unless you re-SELect that channel/bus/contribution etc.
NOTE: COPY/PASTE does not copy GAIN or 48v as these are considered ‘external
attributes’ not a part of the processing channel itself.
NOTE: COPY/PASTE does not copy names, VCA or MUTE assignments, patching
assignments, VCA masters or DMX control channels.
NOTE: When copying a stereo channel or bus the left channel is copied.
NOTE: When pasting to a stereo channel or bus the clipboard is copied to both the left
and right sides.
To copy a channel or mix
: SELect your source channel or mix and making any changes
before pressing COPY & PASTE. Pressing the COPY & PASTE button copies all parameters of
the currently SELected channel or bus to the clipboard:
1. CHAN – Copies channel or bus level & ON status.
2. IN – Copies phase, HPF filter and in/out status (where applicable).
3. GATE – Copies all gate parameters and in/out status (where applicable).
4. COMP – Copies all compressor parameters and in/out status.
5. EQUALISER – Copies all parametric EQ parameters and in/out status.
6. OUT – Copies delay, pan and routing (where applicable).
7. SENDS – Copies channel to bus or bus to matrix sends and on/off status (where
applicable).
8. GEQ – Copies GEQ (where applicable).
Elements of the channel or bus such as COMPressor may be toggled on/off of the clipboard
by touching the icon on the screen.
1
2
3
4
5
6
7
8
Содержание Si Performer
Страница 1: ...User Guide V1 0 by HARMAN ...
Страница 2: ...2 Soundcraft Si Performer User Guide 0912 ...