manualshive.com logo in svg

SoundCraft Si Performer, Руководство пользователя, Страница: 49 / 80

Поделиться
Скачать
SoundCraft Si Performer Скачать руководство пользователя страница 49

49

Soundcraft Si Performer User Guide  0912

Input Patch

:  

Displays the source patched to the channel; see PATCHING for details 
of the system patching functionality.

Direct Out Patch

:  

Displays the destination patch of the channel direct out function; see 
PATCHING for details of the system patching functionality.

Channel Sends Post-Pre

:

 

It is possible to over-ride the pre/post fade settings imposed by the mix 
masters on a per channel basis; click using the scroll/adjust encoder 
to open the dialogue options of Cancel, All Post or All Pre. Selecting 
All Post or All Pre will set all mix sends of the SELected channel pre 
or post the channel fader. To flip the status of an individual channel 
send pre or post, scroll down the list of mixes and use the scroll/
adjust encoder to flip the channel send pre/post as required.

NOTE: Channel pre/post settings are stored per cue, a cue will need to be stored or 
updated to make any change permanent.

Содержание Si Performer

















































































Отзывы:

Нет отзывов