SoundCraft RM1d, Руководство пользователя

Страница: 25 / 142

25
RM1d/RM1ds User Guide
Restoring the Factor Restoring the Factor
Restoring the Factor Restoring the Factor
Restoring the Factory Default Pr y Default Pr
y Default Pr y Default Pr
y Default Presets esets
esets esets
esets
If your console has been used by someone else previously, you might find it useful to set the
control surface back to its default or ‘null’ position before attempting to go through the start-up
guide.
This will avoid confusion as no signals will be routed to any ‘hidden’ destinations and no other
processing of any kind will be applied to any of the signals.
Please note that resetting the control surface to its factory default settings does not delete any
of the Snapshots Presets, FX Presets or Dynamics Presets.
To reset the control surface to the factory default settings:
1 Press the PRESETS button.
2 Now turn the PARAMETER encoder fully to the left (anti-clockwise) until the LCD
display reads:
3 Now press the DOWN ARROW button to make thr ‘Recall Preset’ field flash
4 Press the flashing PRESETS button again to recall the factory settings.
NOTE: If the display stops at Preset 1 it means that Lockout is ON preventing you from
recalling factory default settings. See Menus 4.26.
NOTE: To re-initialise the RM1d completely returning it to the state it was when it left the
factory, please refer to section 12 ‘Re-Initialising the RM1d’.