SoundCraft RM1d, Руководство пользователя

Страница: 42 / 142

42
RM1d/RM1ds User Guide
Monitor Section Monitor Section
Monitor Section Monitor Section
Monitor Section
Studio and Control Room Zones
Both Monitor Sections (19) operate in an identical manner and can be thought of as ‘zones’.
The CONTROL ROOM zone is where the Presenter and usually the RM1d are located. Any monitor
source selected using the monitor source select buttons (((((
EXT 1, EXT 2, EXT 3, EXT 4, AUX 1,
AUX 2, STE 1, and STE 2 ) will appear on the control room monitor speakers. The RM1d’s VU or
PPM Meters will display the currently selected monitor source if the MONITOR button (28) is
selected.
The STUDIO zone would normally be a recording area acoustically isolated from the control
room. It has the same monitor source select options as those for the CONTROL ROOM.
The MONITOR control next to the MUTE buttons in each section, adjusts the output level sent to
the CONTROL ROOM and STUDIO outputs on the rear of the console. The MUTE buttons will
silence the speakers in either zone when selected. (The output to the headphones remains
active when a
MUTE button is selected.).
The built-in CUE loudspeaker (29) will also mute with the CONTROL ROOM monitors.
The CONTROL ROOM MUTE and STUDIO MUTE buttons can be configured to be automatically
triggered from any or all of the channel faders. (See AUTO MUTING in the SETUP Menu)
Studio and Presenters Headphones
The controls labelled STUDIO PHONES and CONTROL ROOM PHONES (20) each adjust their
associated headphone volumes.
NOTE: The Guest headphone volume is adjusted using the GUEST HEADPHONES page in the
SETUP Menu.
What each zone hears, whether over the monitors or the headphones is selected by using one
of the monitor source buttons (
EXT 1, EXT 2, EXT 3, EXT 4, AUX 1, AUX 2, STE 1, and STE 2 )
The available options are:
l
EXT 1/2/3/4 - External Stereo inputs which cannot be routed to any channel (e.g.
an off-air receiver for program monitoring).
l
AUX 1 & 2 - The auxilliary sends. Both the Aux 1 and Aux 2 buttons will illuminate if
the AUX MASTER control (9) is in stereo mode.
l
STE 1 & 2
(PROG & AUD) - The Main Stereo Master outputs from the console.
NOTE: The PFL bus is automatically routed to the CONTROL ROOM HEADPHONES but not the
studio headphones. Pressing the AUTO button in the studio phones section will allow
the PFL (CUE) bus to also be routed automatically to the studio headphones.