sound4 SOUND4 BIG VOICE2 Base, Инструкция по эксплуатации

Страница: 79 / 97

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel.: +359 56 710710, Fax: +359 56 836700
Email: sales@sound4.com, Web: www.sound4.com
- 79 -
Processing
This chapter explains the adjustment of the processing included in the Big Voice. These
parameters are stored and used in each preset. All channels using the same preset will be adjusted
simultaneously.
Please bear in mind that you might not be able to achieve the sound desired from the first time,
except if you are not an experienced broadcaster.
The processing chain also includes: Preset settings, Input, De-Esser, 3-Band Noise Gate,
Pre-EQ, 3-Band Processing, Post-EQ, Brick Wall Limiter and Output. The 3-Band Noise Gate
and processing sections have an “Advanced” tab that allows access to each band’s individual
parameters.
NOTE that each section can be enabled or disabled individually. The Brick Wall Limiter cannot
be entirely disabled. As a result, the output from a processing channel should never exceed 0 dBFS.
To enable a section that is in bypass mode, click the disabled power button. If the section in
question is already enabled, a click on the illuminated power button will put the section in bypass
mode.
A click on the ■■■ symbol next to each parameter will open a new window containing
information as regards the Factory, Saved and Last value for the parameter in question or other
available options.