Sound Devices PIX 220i Скачать руководство пользователя страница 44

Страница: 44 / 75

In Auto mute timecode modes, the overlaid timecode displayed on the video output will continue to run
when external timecode signal is lost.

External Timecode Mode

Reader mode. The PIX 240i’s internal timecode generator follows an external timecode signal ap-

pearing at the time code input or timecode embedded on the SDI or HDMI input (

See “SDI Input Em-

bedded Timecode”, page 43

). If external timecode is disconnected (or otherwise invalid), the internal

generator continues to run to preserve continuous timecode.

External Timecode Mode - LTC Halt

Reader mode. The PIX 240i’s internal timecode generator follows an external timecode signal ap-

pearing at the time code input or timecode embedded on the SDI or HDMI input (

See “SDI Input Em-

bedded Timecode”, page 43

). If external timecode is disconnected (or otherwise invalid), no timecode

will be maintained on the PIX 240i (The OSD will display dashes and timecode will not be output).
When Setup Menu option

System



Rec Start/Stop

is set to

Timecode

, LTC Halt Timecode Mode

will cause the PIX 240i to stop recording when timecode signal is disconnected or invalid (In addi-

tion to stopping when stationary timecode is received).

Timecode Frame Rate

In External mode, if the incoming frame rate does not match the frame rate as set in

Video



File Resolution/Rate

, the timecode frame rate display will appear orange to notify the user.

The PIX will still record using the File Resolution/Rate.

External - HDMI Timecode Mode (PIX 220i)

This information applies to the PIX 220i only. HDMI embedded timecode on the PIX 240i is treated like
all other external timecode sources. (

See “External Timecode Mode”, page 42

)

When the Setup Menu option

Timecode/Sync



Timecode Mode

is set to

Ext TC (HDMI)

, and a cam-

era is sending valid timecode embedded in the HDMI signal, the PIX 220i will stamp recorded files

with this timecode.

Timecode Input Sources

LEMO 5-pin

The LEMO 5-pin connection provides access to timecode input, timecode output, and Ambient® tun

ing. Several Sound Devices cable accessories split this connection to input and output connectors on

BNC (XL-LB2), XLR (XL-LX), or LEMO 5-pin (XL-LL). To accept timecode at the LEMO 5-pin input,

the Setup Menu option

Timecode/Sync



Timecode Mode

must be set to

Ext TC (LTC)

. If timecode is

present on the Timecode BNC connection, it will take precedence over timecode on the LEMO 5-pin

connection.

Timecode BNC

The Timecode BNC will provide timecode output (by default) or timecode input. When the Setup

Menu option

Timecode/Sync



Timecode BNC is

set to

Timecode Input

and Setup Menu option

Timecode/Sync



Timecode Mode

is set to

Ext TC (LTC)

, timecode at Timecode BNC connection will

take precedence over timecode on the LEMO 5-pin input.

PIX 220i and PIX 240i Video Recorder User Guide and Technical Information

v. 3.51

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Sync

onization & T

imecode

Содержание PIX 220i












































































Результаты поиска

Содержание PIX 220i

Отзывы:

Похожие инструкции для PIX 220i

Бренды по названию

Популярные бренды

Sound Devices PIX 220i, Руководство пользователя и техническая информация

Результаты поиска

Содержание PIX 220i

Отзывы:

Похожие инструкции для PIX 220i

Бренды по названию

Популярные бренды