background image

Press and hold the AUDIO button, and then turn the Control Knob to adjust the headphone level. 

Press and hold the AUDIO button, and then push the Control Knob to cycle through signal source 

for the headphones. (

See “Audio Outputs”, page 23

)

Files 

Press the FILE button (keyboard: F2) to display the File List; A list of all of the clips (grouped by reel) 

on the selected storage media. Turn the Control Knob to highlight an item. Press Play to start play 

back of the highlighted clip.

Reel group

 

Number of clips in the reel 

indicated in brackets. 

Press 

Control Knob to expand or 

collapse.

Clip

 

Multi-file clip. Number of 

files in the clip indicated in 

brackets. 

Press Control Knob 

to expand or collapse. Press 

Play to play first clip.

File

 

File of a multi-file clip. Only 

shown when clip is expanded. 

Press Control Knob to view 

details. Press Play to play.

Clip

 

Single file clip. 

Press Control 

Knob to view details. Press 

Play to play.

Menu & N

avig

ation

PIX 220i and PIX 240i Video Recorder User Guide and Technical Information

15

Содержание PIX 220i












































































Отзывы: