Sound Devices MixPre II Series Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 73

Sound Devices MixPre II Series Скачать руководство пользователя страница 72

This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1)
this device may not cause interference, and 2) this device must accept any interference, including interference that may cause
undesired operation of the device.

Cet appareil est conforme avec Industrie Canada, exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux
conditions suivantes: 1) ce dispositif ne peut pas causer d’interférences, et 2) ce dispositif doit accepter toute interférence, y compris
les interférences qui peuvent causer un mauvais fonctionnement de l’appareil.

Copyright© 2022 Sound Devices, LLC. All rights reserved.

This product is subject to the terms and conditions of a software license agreement provided with the product, and may be used in
accordance with the license agreement.

This document is protected under copyright law. An authorized licensee of this product may reproduce this publication for the
licensee’s own personal use. This document may not be reproduced or distributed, in whole or in part, for commercial purposes,
such as selling copies or providing educational services or support.
This document is supplied as a technical guide. Special care has been taken in preparing the information for publication; however,
since product specifications are subject to change, this document might contain omissions and technical or typographical
inaccuracies. Sound Devices, LLC does not accept responsibility for any losses due to the user of this guide.

Trademarks

The “wave” logo is a registered trademark and Kashmir is a trademark of Sound Devices, LLC. iPad, iPhone, Mac and OS X are
trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in
the U.S. and other countries. Bluetooth Smart is a registered trademark of Bluetooth SIG, Inc. ASIO is a registered trademark of
Steinberg Media Technologies. All other trademarks herein are the property of their respective owners.

WEEE Statement

If you wish to discard a Sound Devices product in Europe, contact Sound Devices (England) for further information.

Warning! This device can drive headphones to potentially dangerous levels. Do not listen at high volume levels for
long periods.

Read and fully understand this manual before operation.

MixPre II Series

User Guide

71

«
...
70
71
72
73
»

Содержание MixPre II Series










































































Отзывы:

Нет отзывов