Sound Devices MixPre II Series, Руководство пользователя, Страница: 24 / 73

Channel Screen - Basic Mode
The MixPre II’s flexibility is enhanced by its ability to select various input types to its mixer channels. On the MixPre-3 II, channels
can be sourced from XLR mic/line input, 3.5 mm Aux line or mic input, or from USB channels. On the MixPre-6 II and MixPre-10 II,
channels can be sourced from XLR or TRS mic/line input, 3.5 mm Aux line or mic input, or from USB channels.
Access the channel’s input settings by pushing in the channel’s knob. There are three channel inputs on the MixPre-3 II, 6 channel
inputs on the MixPre-6 II, and 10 channel inputs on the MixPre-10 II.
Channels 5 and 6 on MixPre-6 II and 9 and 10 on the MixPre-10 II are controlled in the Inputs menu. Input source, gain, pan, and
lowcut are all available in this menu.
Channels use a single gain stage adjusted by the knob. Levels set at the channel knob are sent to the LR mix record channels and
the LR outputs. Limiters are present on each channel and the LR mix bus and will ensure that your audio is safe from accidental
clipping.
Pan
Pan the channel’s signal Left, Center or Right in the stereo LR mix and Stereo Out.
Low Cut
Turn Low Cut filter on or off. Useful for reducing unwanted low frequency in the audio of the select channel. In Basic Mode Low Cut
is fixed at 80 Hz.
Input
Select one of the available Mic, Line, Aux (available when Aux In Mode is Mic or Line) or USB inputs as the channel source.
Phantom
Turn on 48 V phantom power when using a condenser microphone in the selected channel (available when Input is Mic).
MixPre II Series User Guide 23