Sound Devices MixPre II Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 73

Sound Devices MixPre II Series Скачать руководство пользователя страница 6

1: Power LED

Glows when the MixPre II is powerd on.

2: Play Button

Press to begin playback. While in playback the button glows green. See Transport.

3: Stop Button

Press to stop recording or playback. While stopped the button glows orange. See Transport.

4: Record Button

Press to begin a recording. While recording the button glows red. While copying in idle, the button flashes red. See Transport.

5: Touch Screen

The sunlight-viewable, high-resolution, touch-screen is used to navigate the MixPre II user interface.

6: Channel Knobs

Sets the input gain for the channel. Press in on knob to access channel screen.

7: Channel LED Ring

Provides visual indication of channel signal condition, solo and mute.

8: Battery Contacts

Accepts power sled accessories designed for MixPre II. Allows powering from AA or Sony L-Mount batteries, such as the included
MX-4AA.

9: SD Card Slot

Insert SD card for recording.

10: Allen Wrench & Anti-Rotational Pin

Magnetically attaches to the MixPre II for safe keeping. Used to attach MixPre II to cameras and tripods via ¼-inch-20-thread
captive screw on MixPre II top panel.

11: Inputs 1-3 Female XLR Jacks

Active-balanced analog microphone or line-level inputs. Inputs 1-2 on left panel, input 3 on the right. [pin-1 = ground, pin-2 = hot (+),
and pin-3 = cold (-)]

12: USB-A Port

1. USB keyboard.
2. Auto-copy to USB drives.
3. USB to approved 3rd party control surfaces.
4. USB hubs to support multiple devices.

13: USB-C Port

MixPre II Series

User Guide

5

«
...
4
5
6
7
8
...
»

Содержание MixPre II Series










































































Отзывы:

Нет отзывов