© 2000-2018 SOTA Instruments Inc.
Page 12 of 13
|
www.sota.com
The Silver Pulser Model ZBB4 Manual
Silver Wire will gradually wear away.
Replacing the Silver Wires
: The Silver Wires are of the highest grade .9999 or 99.99%
or 4 Nine pure fine silver. When the SOTA pure Silver Wires wear too thin, do not
replace with sterling silver, as it contains nickel, which can be toxic.
TYPICAL USE
Quantity:
There is no definite amount to drink. When consumed on a regular basis—
daily or several times a week—it is best to drink no more than 1 to 2 ounces (30 to 60
ml) at a time.
Larger amounts of Ionic~Colloidal Silver—1 cup or more—can be consumed for
short periods of time, for example, a few weeks. It is better to take smaller amounts
throughout the day rather than all at once.
Length of Use:
1 to 2 ounces (30 to 60 ml) or more daily for 2 or 3 months.
Ionic~Colloidal Silver can be used as needed. The initial program can be repeated at
any time. If using for an extended period, it is wise to take breaks.
Strength:
Laboratory testing indicates Ionic~Colloidal Silver is effective as low as 2
ppm. When ingesting on a regular basis, it is suggested to limit the strength to less
than 10 ppm.
ELECTRICAL SPECIFICATIONS
POWER REQUIREMENTS
Use a 9–Volt Alkaline battery for proper operation.
OPTIONAL POWER INPUT
Both functions of the Silver Pulser can also be operated using NiMH rechargeable
batteries. When purchasing rechargeable batteries, it is suggested to take the unit
with you to ensure the batteries will fit the enclosure.
To use a wall adaptor for making Ionic~Colloidal Silver the output should be from
6 to 12 Volts DC with a
Tip or Center Positive
pin and a minimum of 500 mA
(milliamperes) of current. The wall adaptor that comes with other SOTA units can be
used for making Ionic~Colloidal Silver.
Caution
: Exceeding the voltage rating or reverse connection may result in injury
or unit failure. This will
void
the warranty.
To operate the Ionic~Colloidal Silver Function from a 12 Volt DC source, such as an
