SORG kika, Руководство пользователя

Страница: 49 / 60

User manual Kika Page 49 von 60
with setting foam (available at the specialised
trade).
Demounting:
In case of a flat tyre, demount the tyre carefully
from the rim with suitable mounting tools.
Make sure not to damage the rim or the tube in
the process.
Reparation:
Repair the tube according to the indications gi-
ven on the reparation-set, or replace it with a
new one. Examine the rim and the interior of
the tyre for foreign objects which might have
caused the flat tyre.
Only use rim bands which are in perfect
condition to protect the tube from damage by
spoke ends.
Mounting:
Push the rim band over the valve and place the
valve into the rim. Unscrew the valve screw nut.
Now you can draw up the rim band effortlessly.
Make sure that all spoke ends are covered.
Now push the lower tyre part over the bead of
the rim. Inflate the tyre until round. Insert the
weakly inflated tube into the tyre cover. Check
the tube for smooth fit. Then you can easily
mount the upper part of the tyre behind the
bead of the rim with both hands. Start with the
part of the valve which is faced away.
Inflation:
Check whether the tube is perfectly clamped
between tyre and cover.
Check fit of the valve.
First, inflate the tyre just as much so you can
still impress it with your thumb. Check the fit of
the tyre on the rim. If the tyre cover is not
centric on the rim, deflate the tyre a bit, and
readjust it. Then inflate the tyre to maximum
operating pressure (cf. tyre cover) and close
the valve with the protection cap.