SORG Jump beta, Руководство пользователя

Страница: 38 / 44

Jump beta
38
4. Repairs and Maintenance
4.1. Repairs
ATTENTION
Do not conduct any reparations and/or maintenance
work yourself. Contact your medical supply store.
There, the staff is familiar with this work, has all
necessary tools and are trained rehab technicians.
If you have any questions or need help, our qualified
rehab consultants are happy to assist you or turn to
your specialized retailer, who is trained according to
our regulations and who is capable of resuming con-
sultations, service as well as reparations.
4.2 Spare parts
ATTENTION
Safety relevant parts or assemblies can only be built
on or changed by a qualified sanitary house because
of the safety hazard.
ATTENTION
Only original spare parts can be used! They are avail-
able at your medical supply store.
�
INDICATION
Disruption can occur from assemblies from external
companies which can lead to a safety hazard. Spare
parts with the respective item number and drawings
are available at your specialized store and can be
downloaded under www.sorgrollstuhltechnik.de or can
be requested directly from us.
For a correct delivery of spare parts the appropriate
series number of the wheelchair is to be stated! You
will find these on the type label on the wheelchair’s
frame.
�
INDICATION
Every change or modification done on the wheel -
chair by your medical store is to be enclosed in this
user manual with the corresponding information
such as assembling indications and/or operation
instructions and the date of the alteration is to be
documented in the service record.
4.3 Disposal
�
INDICATION
The wheelchair can only be disposed of after consul-
tation and approval from your benefactor.
As a general rule, the disposal of the wheelchair must
conform to the respective national legal regulations.
You may seek information about local disposal orga-
nizations from your city or municipal administration.
Our packaging materials are 100% recyclable.
Metal parts may be put to scrap metal recycling or
sent to our factory. Plastic and textile parts may be re-
cycled as well.
4.4 Tire change
With a little bit of technical skill and suitable tools, you
can fix a flat tire yourself. It is advisable to always carry
a repair kit and an air pump for emergencies. Suitable
air pumps can be purchased at your specialty store. An
alternative would be a puncture repair spray which fills
your tire with setting foam (available at the specialty
store).
Dismounting
In case of a flat tire, remove the tire carefully from the
rim with suitable mounting tools. Make sure not to
damage the rim or the tube in the process.
Repair
Repair the tube according to the indications given on
the reparation set, or replace it with a new one. Ex-
amine the rim and the interior of the tire for foreign
objects which may have caused the flat tire.
Only use rim bands which are in perfect condition to
protect the tube from damage caused by spoke ends.
Mounting
Push the rim band over the valve and place the valve
into the rim. Unscrew the valve screw nut. Now you can
draw up the rim band effortlessly. Make sure that all
spoke ends are covered.
Now push the lower tire part over the bead of the rim.
Inflate the tire until round. Insert the weakly inflated
tube into the tire cover. Check the tube for smooth fit.
Then you can easily mount the upper part of the tire
behind the bead of the rim with both hands. Start with
the part of the valve which is faced away.
Inflation
Check if the tube is perfectly clamped between tire
and cover.
Check the valve fitting.