SORG Jump beta, Руководство пользователя

Страница: 28 / 44

Jump beta
28
3.9 Push handles
ATTENTION
All push aids (push handles/push bails) are only
there TO PUSH the person in the wheelchair.
For all various push aids please regard:
ATTENTION
NEVER carry the wheelchair with passenger over an
obstacle (stairs, steps, curb sides etc.).
ATTENTION
The eccentric clamps of the pull-out push handles
can loosen under adverse conditions. Before
overcoming each obstacle, be sure to check them
to make sure they are tightly closed.
ATTENTION
The tripod spring must always be visibly sticking
out of the holes at the bottom of the holder.
ATTENTION
Do not hang any objects (bags etc.) on the push aids!
DANGER OF TIPPING OVER
3.9.1 Pull-out push handles
Removing/applying the push handles
(1) At the bottom end of the push handles (A) there
is on each side one safety button (tripod spring) (B) ,
which prevents the push handle from sliding out of
the holder (C) while adjusting the height.
(2) To remove:
• open the eccentric clamp (A) .
• Push the safety button (B) on the push
handle,
• hold it in this position and simultaneously
pull the push handle out of the holder (C) .
To apply:
• open the eccentric clamp,
• push the safety button in the holder,
• guide the push handle in the holder
• and close the eccentric clamp.
ATTENTION
Be sure that the push handles are absolutely tight
and the tripod spring is visible at the end of the
tube. If necessary, reset the clamp force of the
setting screw (D).
(1)
(A)
(C)
(B)
(2)
(D)
(A)
(C)
(B)