30
Special functions
Energy saving mode switches the heating on when T eco is undershot und
heats up to T eco + hysteresis when solar charge is active.
6.5.2.8. - Energy saving mode
6.5.2.9. - Periods
Thermostat activity times
Set the desired periods of time when the thermostat should be active. 3 periods
can be set per day, settings can also be copied to other days. Outside the set
times the thermostat is switched off.
R
el
ay
fu
nc
tion
s
6.5.3. - Cooling
This is used to cool down e.g. storages to a setpoint temperature by radiating
heat.
6.5.3.2. - Co T set
Target temperature at thermostat sensor 1. Cooling is on above this tempera-
ture till Co T set + hysteresis is reached.
6.5.3.3. - Co hysteresis
If the temperature at th drops below Co T set + hysteresis, the relay is
switched off.
6.5.3.4. - Cooling (sensor)
Reference sensor of the cooling function.
6.5.3.5. - Periods
Cooling activity times
Set the desired periods of time when the cooling should be active. 3 periods
can be set per day, settings can also be copied to other days. Outside the set
times the cooling function is switched off.
6.5.4. -
Return flow increase
This function is used to raise the temperature of e.g. the return flow by the stor
-
age.
6.5.4.2. - RF Tmax
Maximum temperature at the return flow sensor. If this temperature is exceed
-
ed, the relay is switched off.