Soozier A90-165, Инструкция по сборке

Страница: 9 / 18

Series Monitor
SPECIFICATIONS
:
TIME(TMR)
………………………………………
00:00-99:59 MIN
SPEED(SPD)
………………………………………
0.0-99.9KM/H
DISTANCE
（
DST
）………………………………
0.00-999.9KM
CALORIES
（
CAL
）………………………………
0-9999KCAL
PULSE(PUL)
………………………………
40-240BPM
KEY FUNCTION
:
MODE : This key lets you to select and lock on to a particular function you want.
RESET :Reset the value to zero by pressing the key.
OPERATION PROCEDURES:
1.
AUTO ON/OFF
:
▲The system turns on when any key is pressed or when it receives an input from the speed sensor.
▲The processor turns off automatically when the speed sensor has no signal input or no key is pressed for
approximately 4 minutes.
2.
RESET
:
The unit can be reset by changing the batteries or pressing the RESET key for 3 seconds.
3.
HOW TO PRESET TIME
,
DISTANCE
,
CALORIES:
Press the MODE key until the function brand which is going to be preset is flashing.
Press the MODE key once the function brand stop flashing.
Next,Choose the value you want to exercise by the MODE key.
When the speed sensor has any signal input.the monitor will begin to count down.
If data is not preset,Any function date will count up.
TIME : The time of exercise will be displayed by pressing MODE .Key until brand TMR appear.
SPEED: Current speed will be shown by pressing MODE key until brand DST appear.
DISTANCE: The distance of each workout will be displayed by pressing MODE key until brand
dst appear.
CALORIES
:
The calories burned will be displayed by pressing mode key until brand cal appear.
SCAN: Auntomatic display of the following functions in the order shown:
TIME-SPEED-DISTANCE-PULSE-CALORIES(repeat)
4、
BATTERY
This monitor uses two
“
AA
”
or “AG” 13 batteries .You can replace the batteries at the back of the
unit.