1-8 (E)
WLL-CA50
8.
Disconnect the harness from the connector CN5 on the
PS-645 board.
9.
Remove the four screws, and remove the TR assembly
in the arrow direction.
10. Disconnect the coaxial cable from the coaxial connec-
tor on the transmitter.
n
When disconnecting the coaxial cable, do not attempt
to remove by pulling the cable. Be sure to hold the
plug to remove.
11. Disconnect the flexible card wire from the connector
CN6 on the PS-645 board.
n
Be careful not to bend the flexible card wires. This
shortens the wire life.
CN5
P2.6
x
4
P2.6
x
4
PS-645 board
TR assembly
PS-645 board
CN6
Transmitter
Hold the plug to
remove.
OK
Do not atempt to
remove by pulling
the cable.
NG
