1-7 (E)
WLL-CA50
MB-998 board
CN8
CN3
CN11
CN11
CN3
Harness (CAMERA)
P2
x
3
OK
NG
Hold the plug to
remove.
Do not atempt to
remove by pulling
the cable.
Wiring clamp
PS-645 board
CN1
CN2
CN4
M2
x
4.5
M2
x
4.5
Spacer
3.
Lift up the wiring clamp on the MB-998 board to
unfasten the harness and coaxial cable.
4.
Remove the screw, and disconnect the harness (CAM-
ERA) from the connector CN3 on the MB-998 board.
5.
Disconnect the flexible card wire from the connector
CN11 and coaxial cable from the connector CN8 on
the MB-998 board.
m
.
Be careful not to bend the flexible card wires. This
shortens the wire life.
.
When disconnecting the coaxial cable, do not
attempt to remove by pulling the cable. Be sure to
hold the plug to remove.
6.
Disconnect the harnesses from the connectors CN1,
CN2, and CN4 on the PS-645 board.
7.
Remove the three screws, and remove the spacer.
