16
MZ-N910
Key and Jog Check Mode
This set can check if the set and remote commander function nor-
mally.
• Setting method of key check mode
1. Set the test mode (see page 12).
2. Pressing the
[T MARK]
key or
[DISPLAY]
key on the remote
commander for several seconds (about 3 seconds) activates the
key check mode. (At the last two digits, AD value of remote com-
mander key line is displayed in hexadecimal)
3. When each key on the set and on remote commander is pressed,
its name is displayed on the remote commander LCD. (The
operated position is displayed for 4 seconds after the slide
switch is operated. If any other key is pressed during this dis-
play, the remote commander LCD switches to its name dis-
play)
Example1: When the
>
key on the set is pressed:
Example2: When the
>
key on the remote commander is
pressed:
4. When all the keys on the set and on the remote commander are
considered as OK, the following displays are shown.
Example1: When the keys on the set are considered as OK:
Sound Skip Check Result Display Mode
This set can display the count of errors that occurred during the
recording/playing for checking.
• Setting method of sound skip check result display
mode
1. Set the test mode (see page 12).
2. Press the
N
key or
REC
.
key, and the playing or re-
cording sound skip check result display mode becomes active
respectively and press the
>
key on the remote commander,
and then the playing sound skip check result display mode
becomes active where the LCD displays the following.
3. When the
N
key is pressed, total error count is displayed on
the LCD, and each time the
>
key is pressed, the display item
moves down by one as shown below. Also, if the
.
key is
pressed, the display item moves up by one, then if the
REC
.
key is pressed, the display in the record mode appears.
When the
REC
.
key is pressed, total error count is dis-
played on the LCD, and each time the
>
key is pressed,
the display item moves down by one as shown below. Also, if
the
.
key is pressed, the display item moves up by one,
then if the
N
key is pressed, the display in the play mode
appears.
• Cause of sound skip error
Cause of error
Description of error
EIB
Sound error correction error
Play
Stat
Decoder status error
Adrs
Address access error
BEmp
Buffer is empty
BOvr
Buffer is full, and sounds were
dumped
Record
Bful
Buffer capacity becomes less,
and forcible writing occurred
Rtry
Retry times over
4. To quit the sound skip check result display mode and to return
to the test mode (display check mode), press the
x
key.
Remote commander LCD display
Total count of play
system errors (hex.)
Total count of record
system errors (hex.)
P * * R * *
000
000
P * * R * *
000
E I B * *
000
S t a t * *
000
A d r s * *
000
B E m p * *
000
# # # # # #
000
P * * R * *
000
B O v r * *
000
B f u l * *
000
R t r y * *
000
# # # # # #
P**R**
: Total play/record errors (hex.)
**
: Counter of sound skip check each item (hex.)
######
: 6-digit address where sound was skipped last (hex.)
Playing sound skip
result display
Recording sound skip
result display
Remote commander LCD display
**
: AD value of the remote commander key
(hexadecimal 00 to FF)
**
000
Remote commander LCD display
**
: AD value of the remote commander key
(hexadecimal 00 to FF)
FF **
000
Remote commander LCD display
**
: AD value of the remote commander key
(hexadecimal 00 to FF)
rFF **
000
Remote commander LCD display
Set LCD display
**
: AD value of the remote commander key
(hexadecimal 00 to FF)
SET OK **
888
SET OK **
888
