Sony VPH-G90E, Руководство по установке

Страница: 65 / 480

Before adjustment
65
(GB)
Before adjustment
The INPUT INFO (Information)
Menu
(User/Pro-user/Service/Expert modes)
The INPUT INFO menu displays the information on
the current input signal.
I N P U T - A
f H : 3 1 . 4 0 K H z
f V : 5 9 . 9 9 H z
H / C : P V : P S o n G : N
I N P U T S I G N A L :
R G B
I N P U T M E M O R Y N o . 3
N o . 1 2
V I D E O M E M O R Y : 1
1 6 : 9 N T S C S I G N A L
n
PIC
CTRL
SET
SETTING1
SET
SETTING2
INPUT
INFO.
SEL:
EXIT: MENU
fH (Horizontal frequency)
Indicates the horizontal frequency of the input signal.
This indication is not an absolute value, but is only
used as a guide.
The horizontal frequency of the input signal is
indicated in green; that of the internal signal in yellow.
fV (Vertical frequency)
Indicates the vertical frequency of the input signal.
This indication is not an absolute value, but is only
used as a guide.
The vertical frequency of the input signal is indicated
in green; that of the internal signal in yellow.
H/C (Horizontal/Composite sync)
V (Vertical sync)
SonG (Sync on Green)
Indicates the polarity and use of each sync signal.
P: The polarity of the sync signal is positive.
N: The polarity of the sync signal is negative.
–: No sync signal is input.
INPUT SIGNAL
Displays the type of current input signal.
INT. OSC: No input
COMPONENT: Component input signal
IDTV: IDTV input signal from the optional PC-1271/
1271M Signal Interface Switcher via the optional
IFB-3000 Interface Board installed to the PC-1271/
1271M.
RGB: RGB input signal
HDTV YP
B
P
R
: HDTV YP
B
P
R
input signal
HDTV GBR: HDTV GBR input signal
15 kRGB: 15 kHz RGB input signal
SDI 4:2:2: SDI 4:2:2 input signal
DRC: when the DRC is set to ON
Video or S video signals
NTSC 3.58: NTSC
3.58
input signal
NTSC 4.43: NTSC
4.43
input signal
PAL: PAL input signal
PAL-M: PAL-M input signal
SECAM: SECAM input signal
B/W: Black and white input signal
S-VIDEO: S video input signal
INPUT MEMORY No.
The upper number is the memory number of the data
automatically loaded when the current signal is input.
The lower number is the new memory number in
which the adjustment data of the current input signal is
stored. The existing memory number is displayed in
green, a new memory number in yellow, and a
protected memory number in red.
For details, see “Input Memory” on page 133
(GB)
.
VIDEO MEMORY
The selected video memory number is indicated.