Sony VPH-G70VRM, Руководство по эксплуатации

Страница: 45 / 52

Installation/connection examples
Installation/connection examples
45
Using the Signal Interface Switcher
When you install the IFB-40 Signal Interface Board (not supplied) to the
projector and connect the PC-1271/1271M Signal Interface Switcher (not
supplied) to the IFB-40, you can connect easily various input sources.
Choose the appropriate cable from the following table.
1 m 2 m 5 m 10 m 15 m 25 m 50 m
— CCQ-2BRS CCQ-5BRS CCQ-10BRS — CCQ-25BRS CCQ-50BRS
SIC-M-1 — SIC-M-5 — SIC-M-15 SIC-M-25 SIC-M-50
Notes
• Insert the female and male plugs of the SIC-M or CCQ-BRS cable
correctly.
• You can extend the SIC-M or CCQ-BRS cable up to 50 m.
• The video signal input to the signal interface board installed to the
INPUT B section should not exceed 70 MHz. When projecting the video
signal which exceeds 70 MHz, connect the signal source to the INPUT A
connectors using the 5BNC cables.
Setting up
• Set INPUT-A in the SET SETTING menu to RGB.
For details, see “The SET SETTING Menu” on page 36.
• Set the SINGLE/SECOND/OTHER select switch on the switcher to
SINGLE.
R-Y
R
P
R
G
Y
B-Y
B
P B
SYNC
HD
VD
INPUT A
ABL LINK
OUT
IN
TRIGGER
IN
PLUG IN
POWER
OUT
REMOTE
INDEX
RS-422A
CONTROL S
IN
OUT
AC IN
MAIN POWER
ON OFF
100~120V 15A 250V
200V~240V T6.3A 250V
MODE
REMOTE1
R
B
VD
SYNC/HD
G
Rear
IFB-40 Signal Interface Board
(not supplied)
IN
SIC-M or CCQ-BRS
connecting cable
to REMOTE 1
OUT
Video
equipment
Computer
to RGB output
AC IN
AC power cord
(supplied)
to a wall outlet
PC-1271/1271M
Switcher