Sony VPH-G70VRM, Руководство по эксплуатации

Страница: 33 / 52

Adjustments and settings using the menu
Adjustments and settings using the menu
33
The INPUT SETTING Menu
The INPUT SETTING menu is used to adjust the input
signal.
Items that can be adjusted are displayed in green.
You cannot select the items indicated in white.
Page 1
I N P U T - A
C O L O R T E M P : 6 5 0 0
C L A M P : A U T O
V S H I F T : W I D E
S Y N C S E L : A U T O
C O M P O N E N T F O R M A T :
S M P T E / E B U - N 1 0
S Y N C O S C : 1
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER EXIT: MENU
Page 2
I N P U T - A
R G B S I Z E
R G B S H I F T
B L K G
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
COLOR TEMP (Temperature)
Selects the appropriate color temperature according to
your application and the input source signal.
INPUT
SELECT
PIC/AU
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET: ENTER EXIT: MENU
C O L O R T E M P 9 3 0 0
C L A M P : A U T O 6 5 0 0
V S H I F T : W I 5 4 0 0
S Y N C S E L : A 3 2 0 0
C O M P O N E N T P R E S E T
S M P T E
S Y N C O S C : 1
CLAMP
Corrects the luminance of the input picture.
INPUT
SELECT
PIC/AU
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER EXIT: MENU
I N P U T - A
C O L O R
C L A M P A U T O
V S H I S o n G
S Y N C H / C
C O M P O H P
T R I - L E V E L S
S Y N C
CLAMP is used as a standard for setting the black
level of a picture correctly. The standard position of
the clamp depends on the kind of sync signal being
used. Normally, the projector CPU judges the signal
and sets the position automatically. However, the CPU
can misjudge the signal because of noise. If the
luminance of the picture seems to be incorrect, the
clamp position may need to be changed.
AUTO: Automatic setting mode. Normally set to this
position.
SonG: Set to this position if the black seems too light
or greenish.
H/C: Set to this position if the picture is too dark or
luminance is unstable.
HP: If the luminance is still incorrect after changing to
the SonG or H/C position, set to this position and
perform the H-SHIFT adjustment.
TRI-LEVEL S: Set to this position if the picture is
dark when using the tri-level sync.
Note
If the luminance is still incorrect after changing the
clamp setting, check the input signal and the
connections.