Appendixes
26
Appendixes
Appendixes
In Case of Problems
If you encounter a problem while using the printer, please check whether the following information can help you
fix the problem before contacting the Sony Service Center.
About Caution Indicator Lamps
Indicator lamps light or blink when an error occurs, to indicate the cause of the error. The table below shows the
various lamp error conditions and their corresponding remedies.
Lamp State ( =lit, =blinking, =off)
Description/Remedy
ALARM
RIBBON
CARD
READY
The ink ribbon is getting short.
→
Prepare a new ribbon.
End of ribbon.
→
Replace the ribbon (page 11).
The Auto Card Feeder is empty.
→
Add cards (page 23).
The internal Bad Card Stacker is full.
→
Remove the bad cards.
A card is jammed in the manual feeder.
→
Turn the power off and back on.
1)
A card is jammed in the printing mechanism.
→
Turn the power off and back on.
1)
A card is jammed in the card inverting mechanism.
→
Turn the power off and back on.
1)
A card is jammed in the bad card ejecting mechanism.
→
Turn the power off and back on.
1)
A card is jammed in the first Auto Card Feeder.
→
Turn the power off and back on.
1)
A card is jammed in the second Auto Card Feeder.
→
Turn the power off and back on.
1)
A card is jammed in the Auto Card Stacker.
→
Turn the power off and back on.
1)
The print head is dead.
→
Replace the print head.
An error occurred that requires technical service.
→
Contact the nearest Sony Service Center.
1) Turning the printer off and back on should automatically remove a jammed card.
