Sony UP-CX1 series, Руководство по эксплуатации, Страница: 15 / 22

15
Printing from the Computer
Ope
rat
ion
Printing from the
Computer
Before starting to print
• Confirm that the printer and computer are connected
(page 7) .
• Confirm that the paper roll and the ribbon cartridge are
correctly installed (page 10) .
• Confirm that compatible ribbon cartridge and printing
paper are installed (page 8) .
Do not look into the paper output slot during printing. The
sharp edge of the printout may poke your eye or face. This
may cause loss of sight. Also, do not insert a foreign object
in the paper output slot. The cutter may be damaged or
broken and a piece of the cutter can cut you.
Printing
1
Turn on the printer and computer.
The (ON/STANDBY) indicator lights after a few
seconds.
After turning the printer off, wait at least 5 seconds
before turning it on again.
2
Make sure that the indicator is not lit.
If the indicator is lit, the size of the paper roll
and ribbon cartridge may not be the same, or the paper
roll or ribbon cartridge may not be loaded correctly.
Reload them if necessary.
3
Send the print data from the computer to the printer,
and begin printing.
For details, refer to the operating instructions for the
printer driver.
1
The (PRINT) indicator flashes while the
image data is being sent.
2
A command to begin printing is sent form the
computer, and printing begins. The
(PRINT)
indicator remains lit while printing is in progress.
3
The printed images are ejected from the eject slot
after printing. The print time depends on the size
of the image and the type of paper roll and ribbon
cartridge used. The
(PRINT) indicator turns
off after printing is complete.
• Do not disconnect the USB cable while data
transmission or printing is in progress.
• Wait at least 5 seconds after disconnecting the USB
cable before reconnecting it.
• The number of prints that can be stored in the paper tray
varies greatly depending on the usage environment and
the images printed. Be sure to remove printed images
quickly. When using the 2UPC-C13 printing pack, be
sure to raise the paper eject stopper.
If the printer does not print
The ALARM or indicator lights when an error
occurs and the printer is unable to print. For details on
errors and how to deal with them, see
“Printing Trouble”
on page 20 .
Notes on storing your printouts
• Avoid exposure to direct sunlight, or conditions of high
temperature and high humidity, which could cause the
colors to fade.
• Avoid applying tape to a printout, and avoid contact with
plastic objects such as erasers and desk mats.
• Do not allow alcohol or other volatile organic solvents to
come into contact with the printouts.
Note
Note
ON/STANDBY button
Notes