Sony UP-CX1 series, Руководство по эксплуатации, Страница: 8 / 22

8
Loading Paper Roll and Ribbon Cartridge
Ope
rat
ion
Loading Paper Roll and
Ribbon Cartridge
When using the printer for the first time, you must first
load a paper roll and ribbon cartridge. When using the
2UPC-C14 or 2UPC-C48PF, adaptors must be installed in
the paper holder, as described in the section
“Attaching
adaptors to paper holder” on page 9 .
For information on how to remove a spent paper roll and
ribbon cartridge, see the section
“Removing the paper roll
and ribbon cartridge” on page 12 .
• Always use a designated print pack.
• Always replace the paper roll and ribbon cartridge
together as a set.
Handling the paper roll and ribbon
cartridge
• The print pack contains two ribbon cartridges and two
paper rolls. Be sure to use the ribbon cartridge and paper
roll in the same carton as a set. (See
“Ribbon Cartridge
and Paper” on page 19 .)
• The number of sheets that can be printed depends on the
print pack type. The table below lists the image count for
one ribbon cartridge and paper roll set.
• Do not replace the ribbon cartridge and paper roll before
they are used up. Otherwise the above number of sheets
may not be achieved.
• Place the paper roll vertically. If you place the paper roll
horizontally, the paper roll may roll around and fall. This
may cause an injury.
• Hold the paper roll with both hands so that you do not
drop it, because it is heavy. Dropping may result in an
injury.
• If inserting the paper core into the paper roll is difficult
when loading the paper roll, squeeze the roll from both
sides to restore its shape.
• An IC board is incorporated in the ribbon cartridge. Do
not touch the terminal of the IC board with anything,
including your fingers or metallic objects. Also, do not
strike, bend, or drop the IC board.
Operation
Notes
Notes
Print
pack 2UPC-
C13 2UPC-
C14 2UPC-
C15 2UPC-
C48PF
Number of
sheets 300
(sheets) 200
(sheets) 172
(sheets) 150
(sheets)
Print size 89 × 126
mm ±
2 mm
(3.5 × 5 in.
± 3/32 in.) 101 ×152
mm ±
2 mm
(4 × 6 in. ±
3/32 in.) 126 × 178
mm ±
2 mm
(5 × 7 in. ±
3/32 in.) 101 × 203
mm ±
2 mm
(4 × 8 in. ±
3/32 in.)
Hold the paper roll with both hands.
Squeeze from both sides.
IC board