Sony UP-CX1 series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 22

Sony UP-CX1 series Скачать руководство пользователя страница 7

7

Connection to a Computer

Pr
ep
arat

io

n

Connection to a
Computer

After connecting a USB connecting cable (not supplied) to
the printer and the computer, connect the power cord. For
details about the printer connection, refer to the manuals
for the computer or other peripheral devices.

Installing the Printer Driver

Before connecting the printer to the computer, install the
printer driver provided with the printer. For detailed
instructions on how to install the printer driver, refer to the
Readme.txt file and the install manual contained on the
CD-ROM disc supplied.

Connections

• Follow the connection procedures described in the

computer manual.

• Make sure that the interface cable is connected securely

at both ends.

• The printer driver software provided with the printer is

not suitable for using the printer connected to a network.

• Operation of the printer is not guaranteed for connection

to a USB hub.

• Before connecting the unit using a USB cable (not

supplied), attach a supplied ferrite core to the end of the
cable to be connected to the printer for noise prevention.

Attaching a ferrite core to a USB cable

Before connecting a USB cable (not supplied) to the
printer, you should attach a supplied ferrite core to its cable
for noise prevention. To conform to radiation standards,
attach the supplied ferrite core to the USB cable of your
device as described below.

1

Release two stoppers on the ferrite core to open it.

2

Slip the USB cable through the ferrite core and
position it at the base of the USB connector to the
printer.

3

Close the ferrite core until you hear a click.

When the ferrite core cannot be secure because the USB
cable is thin, secure it using a tape.

Notes

Note

USB connecting cable
(not supplied)

UP-CX1

to

-

AC IN

connector

AC power cord

to wall outlet

Computer

to USB port

«
...
5
6
7
8
9
...
»

Содержание UP-CX1 series























Отзывы:

Нет отзывов