— 27 —
KV-34FS12T
V. Center Adjustment (VPOS)
Perform this adjustment after performing H. Frequency
(Free Run) Check.
1. Input a crosshatch signal.
2. Activate the Service Adjustment Mode.
3. Select the VPOS item with
and
.
4. Adjust value of VPOS with
and
for the best vertical
center.
5. Press
then
to save into the memory.
H. Center Adjustment (HPOS)
Perform this adjustment after performing H. Frequency
(Free Run) Check.
1. Input a crosshatch signal.
2. Activate the Service Adjustment Mode.
3. Select the HPOS item with
and
.
4. Adjust the value of HPOS with
and
for the best
horizontal center.
5. Press
then
to save into the memory.
H. Size Adjustment (HSIZ)
1. Input a monoscope signal.
2. Activate the Service Adjustment Mode.
3. Select HSIZ with
and
.
4. Adjust with
and
for the best horizontal size.
5. Press
then
to save into the memory.
V. Linearity (VLIN), V. Correction (SCOR),
Pin Amp (PAMP), and Horizontal Trapezoid
(HTRP) Adjustments
1. Input a crosshatch signal.
2. Activate the Service Adjustment Mode.
3. Select VLIN, SCOR, PAMP, and HTRP with with
and
.
4. Adjust with
and
for the best horizontal size.
5. Press
then
to save into the memory.
V LINEARITY (VLIN)
V CORRECTION (SCOR)
PIN AMP (PAMP)
HORIZONTAL TRAPEZOID (HTRP)
V. Angle (VANG), V. Bow (VBOW), Upper pin
(UPIN) and Low Pin (LPIN) Adjustments
1. Input a crosshatch signal.
2. Activate the Service Adjustment Mode.
3. Select VANG, VBOW, UPIN, and LPIN with
and
.
4. Adjust with
and
for the best picture.
5. Press
then
to save into the memory.
V ANGLE (VANG)
V BOW (VBOW)
UPPER PIN (UPIN)
LOW PIN (LPIN)
Service Adjustment Mode Memory
1. Change the value of the DCOL item to “1”.
2. After completing all adjustments, press
then
.
Read From Memory
Green
Red
ENTER
0
service defl vbow
7
ntsc
vchp
Category
Display
Item
Mode
Item
Data
Signal
Type
00000000 00000000
更多难得资料请到江南家电维修论坛免费下载!
http://bbs.520101.com