Integrator Training, UK
Confidential
Digital Cinema Deployment
33 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
correct network cables in place. If cues are not visible, delete the auditorium from
TMS, restart postgresql service, add auditorium restart postgresql service.
Changing the Lens Function Cue Names
When the TMS is first installed the Lens functions are shown below. Please change to
the corresponding values.
Adding Additional Cues
It is possible to add as many cues as required to the Edit Cue Template. Click on the
‘add’ button to add an additional cue. Double click on the cue name to change it and
click on the drop down box to assign the relevant projector cue to the new cue.
Please also add the following cues
before
adding house automation cues:
2D : DVI FLAT
2D : DVI SCOPE
3D : DVI FLAT
3D : DVI SCOPE
Also add cues for HDMI board if required:
2D : HDMI FLAT
2D : HDMI SCOPE
3D : HDMI FLAT
3D : HDMI SCOPE
These are for alternative content. The cues will be automatically shown in the TMS if
the function has been setup the projector.
