Sony SU-600MD, Инструкция по эксплуатации

Страница: 6 / 119

Precaution
GB
2
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Caution
When you dispose of the unit or accessories, you must
obey the laws in the relative area or country and the
regulations in the relative hospital regarding
environmental pollution.
For the customers in Europe
This product has been manufactured by or on behalf of
Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan.
EU and UK Importer: Sony Europe B.V.
Inquiries to the EU Importer or related to product
compliance in Europe should be sent to the
manufacturer’s authorized representative, Sony
Belgium, bijkantoor van Sony Europe B.V., Da
Vincilaan 7-D1, 1930 Zaventem, Belgium.
Inquiries to the UK Importer or related to product
compliance in the UK should be sent to the
manufacturer’s UK Responsible Person, Sony Europe
B.V., The Heights, Brooklands, Weybridge, Surrey
KT13 0XW, United Kingdom.
Caution
For cautions and further information on using this
product, refer to the Instructions for Use for the monitor.
Caution
Do not use the device in a MR (Magnetic Resonance)
environment.
It may cause a malfunction, fire, and unwanted movement.
Precaution
On Safety
• This is the stand for the Sony LCD monitor. For
confirming whether your monitor is compatible with this
unit, refer to the operating instructions of the monitor.
• When you raise the monitor, raise the lower side of the
monitor or the bottom of the stand.
• Clean the surface with a 50 to 70 v/v% concentration
of isopropyl alcohol or a 76.9 to 81.4 v/v%
concentration of ethanol using a swab method.
• Stubborn stains may be removed with a soft cloth such as a
cleaning cloth lightly dampened with mild detergent
solution using a swab method, and then cleaning using the
above chemical solution.
Never use solvents such as benzene or thinner, or acid,
alkaline or abrasive detergent, or a chemical cleaning cloth
for cleaning or disinfection, as they will damage the surface.
• Use the supplied screws for mounting. If you use
screws other than the supplied ones, the screws may
become loose and the device may fall causing injury.
Symbols on the products
Consult the instructions for use
Follow the directions in the instructions for
use for parts of the unit on which this symbol
appears.
This symbol indicates the manufacturer, and
appears next to the manufacturer’s name and
address.
This symbol indicates the Importer, and
appears next to the Importer’s name and
registered office address.
This symbol indicates the European Community
representative, and appears next to the European
Community representative’s name and address.
This symbol indicates the UK Responsible
Person, and appears next to the UK
Responsible Person’s name and address.
This symbol indicates the Swiss authorized
representative, and appears next to the Swiss
authorized representative’s name and address.
This symbol indicates the medical device in
the European Community.
This symbol indicates the serial number.
This symbol indicates the date of
manufacture.
Storage and transport temperature
This symbol indicates the acceptable
temperature range for storage and transport
environments.
Storage and transport humidity
This symbol indicates the acceptable humidity
range for storage and transport environments.
Storage and transport pressure
This symbol indicates the acceptable
atmospheric pressure range for storage and
transport environments.
English